Candle Holders

Printable View

10-03-2009, 11:49 AM
glenn bradley

1 Attachment(s)

Candle Holders

A few more (preparing for Christmas, only 80-odd days left).
10-03-2009, 12:20 PM
John Keeton

Production is on a roll! If you are taking votes, I like the walnut and maple(?) best. Nice contrast.
10-03-2009, 12:48 PM
glenn bradley

Thanks John. The dark arches are walnut in the center, maple and then shedua on the outside. The other arches are mahogany and ash (not as orange as they look in the pic). The Woodsmith knock-off is walnut and beech. BLO and shellac for everybody ;-)
10-03-2009, 2:32 PM
Brian Effinger

They look great Glenn. I really like the rings that you came up with. If I ever get my new grizz bandsaw set up, I may have to try some of these.

Could you give a little more info on the finishing schedule? How many coats, and such? Finishing is still frustrating for me and would like to learn as much as I can.

Brian
10-03-2009, 2:50 PM
glenn bradley

Quote:

Originally Posted by Brian Effinger

Could you give a little more info on the finishing schedule?

Couldn't be easier. Sand to 220, flood with BLO (first coat will soak in in a few minutes), flood with BLO again. Wait 20 - 30 minutes and aggressively wipe off any excess. Let dry a few days, rubbing off any weeping now and again. 6 coats of clear shellac sand with 400 - 600 or rub with a gray syntho pad between coats so it ends up super smooth. Let dry overnight and hit it with some pastewax.
10-03-2009, 2:58 PM
Brian Effinger

Thanks Glenn. :)

That does sound easy.
10-03-2009, 6:02 PM
gary Zimmel

The way your going you will have all your gifts done before Halloween...

Candle holders look great Glenn.
10-04-2009, 9:54 AM
John Thompson

You had to remind of how many days left before Xmas, didn't you? :) Very nicely done and you have given me a few more ideas as I need to get cranking soon. I am starting finish on another project today and hopefully the First Lady will allow me a bit of time to do some gifts. She has already ordered the next piece but maybe I will get a short holiday to do some for her family. :D

Very nice stuff there...
10-04-2009, 7:50 PM
Jim Eller

Glenn,

Nice work.

Are the arches all cut from the same block? What size was the original block?

Thanks,
Jim
10-04-2009, 8:32 PM
glenn bradley

The two groups of three are out of the same block per group. One was about 9" x 4.5" x 2" and the other was about 8" x 4" x 2".
10-05-2009, 9:53 AM
Clara Koss

supper pretty candle holders.... thanks for posting may your holidays shine l:)ike your candles...
10-05-2009, 11:46 AM
Mike Bosdet

Very nice looking!!!! Are you cutting them freehand or using a jig?
10-05-2009, 12:37 PM
glenn bradley

1 Attachment(s)

Quote:

Originally Posted by Mike Bosdet

Very nice looking!!!! Are you cutting them freehand or using a jig?

A quicky shop made jig: http://www.sawmillcreek.org/showthread.php?t=118651
10-05-2009, 1:47 PM
Jim Eller

Glenn,

When putting these arches on graph paper it looks like they are about one inch thick. Is that correct??

Thanks,
Jim
10-06-2009, 6:27 PM
Craig D Peltier

I made about 10 of those rectangle ones 2 years ago for xmas from a woodsmith article. Theres alot that goes into that little thing with all the angles. Doesnt look like much until you look at how its made.
Nice job on the arch ones, good use of the cutouts from the big one. So I huess you can get 6 out of one square block.