Is there some Thread on a dressing tool for a #2MT ?
Printable View
Is there some Thread on a dressing tool for a #2MT ?
What are you looking for a dressing tool to do Joe? For example, I use a shotgun cleaning brush to clean my MT2.
I wanted to clean out the tail stock just touch it up.I have seen it some on something but I cant remember.
What you need is a Morse taper reamer. The reamers used to come cutting and finishing grades. The finishing grade would be fine to touch up and remove any burrs, etc in the taper.
Here's a link to one:
https://www.mscdirect.com/product/details/02057024
You should be able to find an inexpensive import a little less expensive. You could also find a local machine shop who has the reamer and let them do the job, it only takes a minute..
Make your own, https://www.youtube.com/watch?v=6t1OdkxYO2I I found this after a google search. I think it cost me about $5.00 on Amazon, 20 gauge shot gun cleaner/brush.
Grizzly is $41. I bought one, made in India. Works fine for clean up. Probably won't touch a hardened spindle.
http://www.grizzly.com/products/MT-2...ce=grizzly.com
I also use a Morse taper reamer to clean up the MT.
A little cheaper https://www.amazon.com/KISENG-Reamer...e+taper+reamer
I had a small gall in my spindle taper and a #2 Mt reamer took care of it just fine. Make sure it is well centered or you can make things worse.