1 Attachment(s)
10 days to delivery -finish help
HI, I have ten days (thanksgiving) to deliver this trestle table. Here is the table with the stain on it. I have 10 days before it absolutely has to be delivered. My dilemna is what to use as a finish that will be hard and cure by then, while still giving me enough coats.
Options I have considered.
Waterlox - but need 24 hours between each coat -they say to wait 72 hours after stain and then I will need atleast 4-5 coats which leaves no time to cure.
Ceramathane - water born acrylic finish, which I have used and liked very much. A little different "feel" when finished but can do 2 coats a day and start tomorrow.
Oil based poly - could most likely start tomorrow.
What do you think? Anyone used a better product in a hurry?
Kinda expensive, but it works great
If it works into the budget I would use spray cans of Deft acrylic. It will be expensive compared to brushed on finishes, but the wait time between coats is less than one hour and it is quite a durable finish.