Corel Draw letter bleed

Hi everyone,

Its been a long time since I posted anything here because I sold my old laser 2 years ago, and just received my new Shenhui 100W 9060!

Anyways, I'm trying to find a way to avoid this problem I'm having. Whenever I write text with corel draw, and the letter intersect, that intersecting part turns to white (as you can see in the picture).

Attachment 326295

The problem is, this intersection will not engrave on the laser and the text will look awful. If you don't convert the text to curves in CD, you don't see it, but when I export the file to my laser (RDWorks), it shows the bleed.

I couldn't find any old posts about this, because I frankly didn't know what to search for exactly, but any help would be greatly appreciated.

Thanks!
Mohammed

Without a macro, you will have to: convert to curve -> break apart ->weld (the outside lines of the letters) -> trim (with the insides of the letters). This should get you lines without overlap. The last trim isn't necessary if you color them white. Hope this helps a bit!

Great Thanks!

I think I got it to work.

Is there a special macro for this?

Looks related to one of the bugs I submitted while beta testing X5... guess they didn't get it fixed.

It looks like the overlapping of the individual letters. Select it. Under Arrange>Shaping>Weld. This will convert it curves and make it a single piece. One step.

Hope that helps.

Real Mercier

Great, Thanks a lot Real Mercier, Makes it much easier that way!

Mohammed

Hi Mohammed,
Having a chinese laser, as opposed to a western machine, the “fill” function will not do the trick unfortunately. You will need to either do the weld function after having converted to curves, as mentioned above, and then “manually” join any “joints” that have not snapped together properly, or you could use “break apart”, remove the unwanted section and then join up as desired. I am attaching an image of a joint that has not snapped together or jointed correctly. You will have to drag it apart slightly and then drop them back together and it will join properly. If these are not joined properly then the chinese machines will not fill the image correctly.
Attachment 326352

Kind Regards, John

Quote:

---

Originally Posted by Real Mercier

It looks like the overlapping of the individual letters. Select it. Under Arrange>Shaping>Weld. This will convert it curves and make it a single piece. One step.

Hope that helps.

Real Mercier

---

Nice! This helps A LOT :) Thank you!