Well, in no way is this fine furniture. It's all construction grade pine left "rustic" since I don't have a planer and the belt sander could only do so much. I sealed it with de-waxed shellac before using a gel stain glaze and satin poly, as well as paste wax. The wood probably wasn't dry enough prior to flattening since the growth rings have raised a bit. 2x4's for the rails, 2x12's for the top, and 4x4's for the legs all connected with glue and pocket screws. I made it narrower so we could move around it better, but now we can't push the chair in at the ends. Next time I'll measure the chairs first!Attachment 250014Attachment 250015Attachment 250016