4 Attachment(s)
First little HF with NanoTools
Two firsts for me. First little hollowform, and first time using the NanoTools.
Very comfortable system.
The wood is dry mahogany, about 2" tall. Wall thickness is a bit less than 1/10".
After ejnoying turning this piece with the straight and angled cutter, I also ordered and recieved the accessory round carbide (I'm fond of carbide tools) and the steel scraper cutters... and two extra handles.
Though this was purely a hollowing exercise, I am considering adding another first... possibly a finial or lid. Or I may just leave it alone... there are other projects to start.