5 Attachment(s)
Hand made Bridal Joints??
Recently, I have been working to get better at Bridle type joints. PITA! :mad: Trying to get a few legs to sit straight....er. Attachment 256403 Must be an easier way to cut these dang thingsAttachment 256404 Yes it is at an angle, The rails were to be a crossing sort of thing. Thought MAYBE i could just 45 across the top of the legs. Ran into a mismatch between the rail's shoulder, and the corner of the leg. After the first two tries:mad: I backed up, and then just made it squared where the two metAttachment 256405the one not clamped up is the second try. Still not quite what i wanted, but a little closer. There is also an angled half-lap in the mix. Sawn to the lines on one half, then try to match up the other to it. At least the part of that joint that shows, looks goodAttachment 256406 maybe i won't try to be so "Fancy" about the joinery, next time. After all, it is just a tray for Breakfast in Bed..Attachment 256407Just Oak scraps that i reclaimed. The "field" of the tray is reclaimed from an old floor joist, and is Black Cherry. Maybe next time I will keep things a little more simple???