Smart Kids Table, Chair, bench Design

My daughter saw something like this set online and asked me how hard it would be to build. I had quite a bit of cabinet grade maple plywood scraps from a closet system build I did last year. I think the design is really smart. Each piece can be a table or a chair/bench. The chairs can be rotated 180 degrees to change the height. Rather that leave the plywood edges exposed, I banded them. On the chairs I used some scrap walnut and cherry to add a little accent. Delivering them next week to soon to be 5 and 4 year old grand kids.

Nicely done, Joe! Even if you do spell your last name wrong... ;)

They're sure to enjoy those.

Very nice! Love the design! we still have our daughters wee table and chairs she still likes to sit there at 38

Very nice! I don't suppose you have drawings with measurements ...

Jay, I'm attaching my shop notes. Not exactly plans, but enough to get you started. I wanted to be able to break these down incase they need to be moved in the trunk of a car, so they are not glued.

Quote:

---

Originally Posted by Joe A Faulkner

Jay, I'm attaching my shop notes. Not exactly plans, but enough to get you started. I wanted to be able to break these down incase they need to be moved in the trunk of a car, so they are not glued.

---

Perfect! That's exactly what I was hoping for. Thank you.