Morse #2 threaded adapter for tail stock
I'm looking for a means to mount a face plate or even a second chuck on my tail stock, I understand there are threaded adapters on a MT-2 but I haven't been able to find it online. Can anyone here tell me where I might be able to purchase one?
I have a Jet 14" X 42" VS. and need the adapter to be 1" X 8TPI
Thanks for any help offered.
Tim
Here are a couple of options
If you already have the Oneway live center, here's an adapter that will allow it to accept a chuck:
http://www.woodturnerscatalog.com/st..._adapter?Args=
If you don't have the Oneway live center, here's another option:
http://www.pennstateind.com/store/LTCA18.html
Hope this helps.