Ah......
No,
This may be stripped from here as it is not acceptable, but considering the circumstances ... I hope the moderators will make an exception to the rule.....
http://vintagemachinery.org/pubs/detail.aspx?id=1033
Moak produced the 32 for less than a year. ..Ron Smith is still employing parts for Moak band saws, although...I have tried to reach him with no luck.
This band saw is unique and extremely rare....there are no other owners , as far as I know, ....
No manuals, no publications, no reprints....absolutely nothing .....but the 26 and 36......all the information I listed is readily available....
I decided that the saw was indeed going to be "special" , I went overboard but Eugene Moak would be extremely proud .....
So after you look , or have the chance to observe the print...that was the setup for the "Original" 32" Moak - from the factory, .....
I did not buy the saw in this condition.....there were some issues....
Although,
I do have documentation from Ron Smith himself, signed about this saw, information, year built....etc..etc...
Infact the folder for this Moak is pregnant....very pregnant.....LOL
B,