Attachment 403430 . Attachment 403429
Attachment 403431 . Attachment 403432 . Attachment 403433
Its the older style Woodpecker table of phenolic ply. I use their low profile fence and stops as well as a shop made and a Rockler. Having a split face for taller work is great. The low fence clears well but only offers a "stops" sort of holding capability. The shop made one is a solid face, one piece, smooth-both-sides fence that I use when I don't need clearance near the fence and need to clamp odd items.
A block like this adds a lot of function for little effort.
Attachment 403435 . Attachment 403434
Having tracks for the fence and tracks closer to the chuck for work holding is a benefit. Backer is a 4" square that is replaceable as it gets chewed up. If I built my own I would make the insert and offset round disc to get more uses out of it; moving by degrees to a new area instead of by quadrants.