Originally Posted by
John Sproul
I have changed the seat design to a cushioned one, using some thinner lumber ( most likely plywood) but covered with seat cushion foam and some fabric that the wife chose to match her decor ideas. The back rests, I will either buy removable cushions or I am going to attempt to use a steamer box and bend some 3/4 stock to have a slight curve. I'm much more of a carpenter that builds houses, and uses wood lathes to make ballusters etc. I made small projects many times but I also had access to far better equipment than I do now. Thanks for all of th advice guys. Sorry to be in such need of advice so late in the project. I'm sure there are people shaking their heads at rookie mistakes.