Originally Posted by
Prashun Patel
I cannot speak to the Woodpeckers.
The Incra lift is great for a couple reasons:
I chose it over the Jessem because at the time only the Incra insert rings were magnetic. These make them easy to snap in and snap out as you change bits.
Incra fences and lifts excel at micro adjustment. I like the above table bit changes, but I NEED the micro height adjustment.
The downside of my Incra (and I suspect this is user error - not the product) but I have a Milwaukee 5625 in the Incra Master Lift 2, and I find that the bit doesn't go low enough with taller bits like a spiral or straight bit. I made an auxiliary table to allow shallow passes; or you could just use a shorter bit...
Which fence are you considering?