Originally Posted by
Paul K. Johnson
OK, then one more question. I use basically two types of wood. I either order 3S from a sawyer. Not sure if that's the right nomenclature but the two faces and one edge are jointed and smooth. The second edge is live.
The second type of wood I use is kiln-dried pine from big box.
Do I even need a scrub plane? From what I can tell it's mostly used for really rough wood to prepare it for a jack and then a jointer. Or skip the jack and go straight to the jointer.
Remember, my background is building stuff out of balsa where you cut and sand and occasionally use a razor plane.
Thanks for all the help!