It appears that I too missed this thread somehow...
Here are a couple of my Roubo based largely off the BC plans finished in 2013 I think.
Ken, I will note that I built this bench by myself and it also breaks down. As a split-top, I could move the entire bench myself, no trouble. I decided to make the top solid after three years of not using the slot once and have had no regrets. Except briefly, when I moved to a new shop, but that only meant help from one other to move the top. (and for the record, I've never been described as burly...). Thus, I would recommend the BC bench bolts and their design for anyone attracted to a Roubo and are concerned that they might have to move the bench down the line.
Can't really remember life without it and am still grateful to my friends Luke and Mike who supplied the wood :)
The (long!) build is in this thread, including a retro-fit with the excellent chain drive vise from AYC:
https://sawmillcreek.org/showthread....and-Bench-Dead
In the old shop:
And in the new shop:
Best,
Chris