Thanks for posting the picture, Tim.
Printable View
Thanks for posting the picture, Tim.
Any ideas on how to get this logo to look right on a powder coated cup with the 2 colors overlapping https://lh3.googleusercontent.com/uH...3QVkiy4Uo=s170 just he green S with the white sperry. I have a few customers that want powder coated cups but the logos overlap
Thanks in advance
Make the SPERRY solid black, then make the S about 40% black and make it halftone the S.
See the dot pattern that is around Tim's eagle? That's halftoning. It's not solid black. When you have something solid black, the machine spaces the dots close enough together to remove the powder coating. When you halftone it (by making it gray on some laser drivers, or by manually halftoning it in CorelDraw), then it spaces the dots far enough apart that it doesn't remove all the powdercoating, giving you a different look to your eyes. Look at Tim's photo of the Eagle, you'll see it. That's probably too light for you, but if you make the dots closer together than you'd have that. The other option is to put a white outline on the SPERRY text and have that white line not engrave, splitting the two different objects visually.
Thanks I will try an figure out how to do that