Acrylic Flame Polisher Specs for U.S.A.
Hello John, - I have been a lurker here for a while awaiting the arrival of my Mini-24 40W. During that time I have been amassing knowledge/software/materials and familiarizing myself with the basics. I am also interested in purchasing the flame polisher in the group buy with one caveat. The flame polishers in the UK are set up for 220V. I'd like to see the specifications on the particular flame polisher regarding voltage requirement and weather or not it has a switching power supply which will allow it to run on either 110V 60Hz or 220V 60Hz. Different flame polishers have several wattage configurations available so I hope this is detailed in the specifications. I think it would clear up a lot of misconceptions and avoid unnecessary conflicts if the specs on the flame polisher in question were published on the forum prior to me or someone else giving a firm commitment to purchase. - Sincerely, Greg