Home Built

Looking for advice on a spindle to use on my home made cnc. I am using a small router now. I see the 2.2kw units, is that too much for stuff like 3/4 plywwod projects?

[QUOTE=Ken Higginbotham;2547357]Looking for advice on a spindle to use on my home made cnc. I am using a small router now. I see the 2.2kw units, is that too much for stuff like 3/4 plywwod projects?[/QUOTE

I have a 2.2KW spindle and it has more power than PC 7518 router

Thanks Jerome - I think thats what I will go for -

If you're using a small router, be aware that a 2.2Kw will be considerably heavier.

Thanks for the heads up - I see you have a link to JointCam. Are you associated with this venture? I was planning on downloading the app when I have time to tinker with it. I've used Fusion 360 but like CamBam for it's simplicity.

Quote:

---

Originally Posted by Ken Higginbotham

Thanks for the heads up - I see you have a link to JointCam. Are you associated with this venture?

---

Sorry for the late reply, I never saw this.
I'm the author of JointCAM.

Great app! I was thinkking about using it on my home built -