ULS Material/Setting cross reference sheet

Hi All,

I have an older ULS VL200 with both the material and advance driver. When I print, I need to "choose" which driver(method) I'm going to print and can't switch between the 2 on the fly.

I notice with the newer ULS systems and drivers, you can switch back and forth between the materials and manual settings in one window. For anyone out there with this driver, when you are on the materials setting and tab to the advance driver, does it show you the current settings for that material?
For Example, you choose "metal" - "Anodized Aluminum", then click on the manual settings, does it show you the speed/power/dpi for the "metal" - "Anodized Aluminum" material so you can tweak it slightly?

If so :-)... does anyone have a cross reference for all the materials in the ULS database? A text file, spread sheet, db or anything?

Sometimes I want to use the advance driver, but I'm not sure what a good starting point is for the material. It'd be nice to have a cross reference sheet for a place to start.

Thanks in advance!

I rarely use the materials side and almost always use the manual side, but I think the answer, if I remember correctly, is that if you select a material, and then print it, you can click on the manual tab and it will show the settings. It also cuts it down to 3 colors as well, so you don't have all the colors in the color mapping, but it does show the settings.

I don't have any database of their settings, sorry. It would all vary depending on your model/power.

Joseph,

What power laser do you have the 25 or 30 I do have what you want. Let me know what power and where to send it and I will.

Quote:

---

Originally Posted by Mike Mackenzie

Joseph,

What power laser do you have the 25 or 30 I do have what you want. Let me know what power and where to send it and I will.

---

Hi Mike...GREAT!!!

I have the 30W 12"x16" VL200

I PMd you with my email address.

Thanks!


Got it Mike....That's exactly what I was looking for!!