Some planes without adjustable mouths or frogs may benefit from this article:
https://www.popularwoodworking.com/w...shimming-blade
jtk
Printable View
Some planes without adjustable mouths or frogs may benefit from this article:
https://www.popularwoodworking.com/w...shimming-blade
jtk
Thanks, simple as that!
Merry Christmas
Rick
I posted this modification here quite a while back. A few times.
I used brass shim to close up the mouth of a LN #103. This was epoxied to the bed behind the mouth, and serves to raise the blade at this point ....
https://s19.postimg.org/b6fftgnkz/LN...psg9fhr6hf.jpg
https://s19.postimg.org/hiul3aqn7/LN...psykbbtf0z.jpg
https://s19.postimg.org/3nwaktw83/LN...psuxrwlahs.jpg
Regards from Perth
Derek
I tried to open the article, but pop wood is not working for me.
Thanks Jim...Useful article,,