http://www.youtube.com/watch?v=Z65BYu5DxxM
Printable View
Looks to me like a high speed grinder. 3200 rpm right out of the gate. Hope he won't miss his teeth when they get knocked out.
Yeah, I wouldn't want to be in that room when that thing went! Heck, I wouldn't want to be OUTSIDE...that piece of wood, at that velocity, would probably take out that window and kill ya out there...
That be cookin'! some serious RPMs. I be scheered of that one too.
Deane
Whatever happened to that guy who bolted two Shopsmiths together and started turning a 500-pound log with a half-inch bowl gouge? Gotta wonder if that worked out and everyone made it safely to the end of the project.
That setup and the speed it turns at is a little unnerving, sure....but a catch with that skew is what would worry me the most. I can say that the though of a lathe with a grinder "attachment" is a nice thought.
He's definitely not speed roughing with that skew used as a negative rake scraper!
That project turned out great. He showed up on the Shopsmith forum over at shopsmith.net to answer some Shopsmith-specific questions for us. I would include a link if you're interested to read the details, but I'm typing on my phone and copying and pasting links is a pain.
That looks like a accident waiting to happen.
Just because you *can* do something doesn't mean you should. Aside from the speed of the thing, I like how the tool rest is attached with what looks like a single bolt at the bottom. A little push could send it crashing into the turning itself.
The scariest thing about that is the way he is using that poor skew. Can't say it doesn't purr though LOL
The tool rest is totally flat...........his tool work is nothing more than a scraper............he seriously needs some lessons in turning from someone who knows what they are doing! I guess when you improvise and fabricate your lathe, you improvise and fabricate the way you turn as well...............
This is an accident just waiting to happen.........hope he will come on SMC and see what it is supposed to be like and let someone help him before he gets hurt. :eek:
Maybe he learned his speed setting watching that UK guy that has made lots of popular DVD's. Best I remember, when he demo'ed at the local club he started a winged bowl from a board and started at 3200. After everyone realized there wasn't a Huey Cobra landing in the room things settled down.
Well, if nothing else, his sharpening station seems very handy........ :)