Printable View
Hey all,
I was trying to find a 24" steel piano hinge but it seems that most are 36 or 72". I guess they expect you to just cut it. I can deal with that with a little dremel like cutoff wheel but Im wondering what holds the pin in place. If I a 72" into 3 peices, the center piece would have nothing to hold the pin. Am I missing something?
Do you have a home Depot or Lowes near you?? They carry 24". Don't worry about the pin it will not come out. It is not like you imagine.
Thanks, Ill try cutting a piece. yeh, went by HD and Lowes and neither had 24", only larger (Lowes has 12" though). thanks again.
I've cut 6" pieces off of a 36" piano hinge with no problems. The pin stays in from friction.
You can cut those things to any length and they will stay together. i'm not sure but I think one set of tabs are crimped tight on the pin. I have used many a piano hinge cut to lenghts as short as 4" and not had a problem.:D
Good luck
Bob G.