exterior cedar sign

https://youtu.be/Extgf6--9Mg

sign was 29x16x1.5 thick cedar both sides v60 for the letters and 1/4 end mill for profile cut

Nice Sign!!

The carving turned out well but did you mean for the name to be possessive with the apostrophe?

yes its what my neighbors asked for--font size layout and graphic

Nice job, Stan. I've got a cedar sign sold myself. Just wondering, what kind of coating did you put on it?

In a few weeks sell them a 2nd sign Stan without the ' .

I don't really do a lot of sign but when asked i do ....
Also finish wise ,i use diamond varathane exterior water based 5 coats,seems to be ok and easily kept up in the future

Great looking sign! May I ask what you use to seal the sign and how many coats before painting? Also what type of paint? I have tried so many things and still have issues with the paint or stain bleeding.

Thanks

there is a trick to this ,do the cnc part, seal the the whole front of the sign with the diamond varathane exterior finish,let it dry
paint the letters (not real carefull) ,let it dry (use black acyrlic)
Sand the sign 60 grit.120 grit 150 grit,then seal the sign 4 more times with the same stuff diamond ext varathane
So the same with the corian ,except you do not need to seal it at first just apply the paint
This diamond ext finish is good for outside,easy to maintain
This particular wood --hemlock was bad as it chipped a biy and the black was where is shouldn't have been ,but was not that awful