Printable View
Hi guys, I need some help with a lid support for a window seat. It has a solid oak lid approximately 22" X 36" hinged with a piano hinge. the problem is I can't find a dampener to counter weight the lid to prevent finger pinching. I've tried two designs from Rockler but neither have enough resistance to counter the weight of the solid lid. Has anyone out there had similar problem and if so what support do you recommend?
Have you looked into gas springs?
Use more than one. I have a coffee-table sized toy box -- probably five feet long. I used three of the Rockler (or maybe it was four?) and it works fine.Quote:
Originally Posted by Mark Hultzapple
Yup, on projects like that I will typically use at least two supports.Quote:
Originally Posted by David Thompson 27577
Thanks guys, I have considered using two but thought there might be a heavy duty version. Also, I had considered the gas shocks but was afraid it would look more like a car trunk lid.
Have you looked at these lid stays? Here is a link. You need to know the weight but using two is certainly acceptable.
http://woodworker.com/fullpres.asp?PARTNUM=905-669
Try Lewis and Co. in Houston or Outwater Plastics in NJ.
The good ones are generally not cheap. Probably about $25 to $30 each.