Originally Posted by
mark mcfarlane
Bingo!
Thanks Andy. I used my 5-cut blank against the crosscut fence to register the piece to be cut, and was able to rip a 1" wide strip to within .004" over its 4 foot length.
The saw is officially ready for action after I add in a little toe-out to the fence for safety. Now for the J/P setup.
I also need to cut down the 48" square 3/4" birch blank I used for the 5-cut alignment to something more manageable for use as a future square reference, maybe a 24" square ? Whaddya think?