All the drawers are hand dovetailed and most of the carcas construction was done with hand tools. I milled the stock with power tools otherwise I'd be working on it ten years from now.
Here are a few more details. The rasps are in the larger drawer in the bottom of the top cabinet. You can see that I have several saws stored in the bottom left door and sanding disks in the right.
I still havent decided now to finish the large drawer. The smaller ones look okay, but the medium sized ones look kinda plain and I'm afriad a large expanse of curly maple on the large drawer will look "blank". I'm thinking of doing some type of inlay.
The smaller drawers have round ebony pulls turned from pen blanks and the medium sized drawer pulls are routed from ebony pen blanks as well.
