Has anyone here ever used it?
What should I know if I want to use it for signs?
Printable View
Has anyone here ever used it?
What should I know if I want to use it for signs?
OSB. Outdoor Sign Board. It's a different construction than MDF.
As far as I know OSB is "oriented strand board"Quote:
Originally Posted by Myk Rian
Extira is a good choice for signs
Extira is a good choice as well as Sign Foam
both do well outdoors in the elements but Sign Foam is specifically made for sign making. it machines well with regular carbide tooling and takes a finish too.
Look into MDO or Medium Density Overlay.
It's exterior grade plywood with an "MDF-ish" top veneer so it paints up nice, but is suited for outdoor use.
If you ever consider MDF for outdoor use, try the test I did: leave a piece of MDF out in the elements for a month. My test piece expanded to TWICE it's original thickness. I don't think any amount of waterproofing will prevent it from expanding significantly.
I'm sure someone around here's done it with great results, but I personally wouldn't risk it when there are other better plywood-based options.
So, where do I get Sign Foam?
tony,Quote:
Originally Posted by Tony Bilello
do a Google search for distributors in your area.
shawn,
mdf is NOT rated for exterior use.
mdo and mdx are rated for exterior use and can be cut and machined with no loss of waterproofedness.
exteria is a different composition than the md's and is specific for exterior use
Tony, I have MDF signs that have been outside for around 18 years that are still just fine, and our weather here is not kind to, well, anything. I cut and shaped the letters and then treated with a couple of coats of West System epoxy, and then painted with Imron over adhesion promoter used for urethane bumpers.
Plum creek is a good name in mdf for interior use. medex is one that is designed for exterior use. It uses different resins and is rated for exterior use.
MDO is so waterproof that the highway department uses it for their signs with no finish at all on the back and it lasts for many years. It is, however, about $30/sheet more than MDF. I have not tried MDF for signs, but have laser cut lettering with it that were mounted outdoors and had good results. I used a shellac based primer and two coats of paint on the front, back and edges.
If budget is a big consideration I might try it for signs that are at least under an overhang so they will not be sitting in water, otherwise I'd use painted MDO. The sign supply will have it plain, primed, or painted. Here we have several and one will even CNC cut it to size and shape and add T-molding if desired.
Hey Guys,Quote:
Originally Posted by Leo Graywacz
Just wondered if anyone knows if there is an equivilant to "Extira" available in Ireland/UK or even Europe??
I did send an email to Extira and they don't have distributors in Europe.
"The only thing we can do is ship full containers.... " well I don't think I actually want a "full" container:rolleyes:.
Anyone have any suggestions? It's a shame as it looks quite good judging from the photo's on their website.
Thanks
Karen
When you find the cost of SignFoam, you may be surprised. I've used it for many years, but the last time I purchased a 3/4" 4x8 was several months ago. I think it was $90. I've bought it up to 3" thick, about $350. It is extremely porus and to get a slick finish youl'll have to use a product from Coastal Products to fill it. But it has some neat properties for outdoor use.Quote:
Originally Posted by Tony Bilello
Quote:
Originally Posted by Karen Thompson
I just happened upon this thread looking for a stable substrate for veneering (still don't trust MDF). My brother-in-law is running an archeological dig in Roscommon ( Kilteasheen I think) again this summer and will probably be flying back and forth to St. Louis a few more times. Want me to see if he can fit a 4' x 8' sheet in his carry-on luggage? :eek:
:D:D:D oooooh yes please - that's only down the road from me - I can pick it up;):DQuote:
Originally Posted by Stephen Musial