Jefferson Bookcases

I loved the idea that this bookcase is derived from Jefferson's actual notes. Built essentially from PW #190 June 2011, but modified depth dimensions slightly so that the dovetails would align. Dimensions will vary depending on your dovetail layout. Similar to Jameel Abraham's case found here:

http://benchcrafted.blogspot.com/201...ases-done.html

I also used a similar cyma reversa profile for the base and base molding.

The wood is cherry which I purchased from Steve Wall Lumber. As an aside, Wall lumber has always been awesome to deal with. I called and ordered this lumber from them, and requested that if they had any 13"+ wide cherry that they give me enough for the two bottom cases. They really came through with two 14" wide by 12' long boards. With those two boards, I was able to craft each case from one single board, which I think is super cool. Backs are 1/2" beaded shiplapped cherry.

Finish schedule:

- planed smooth
- tanned in the sun for a couple of hours
- BLO
- Dark Garnet Shellac 2lb cut. Sprayed one coat.
- Pratt and Lambert #38 Varnish thinned 1:1 with turpentine. Wiped on 6 coats.
- Liberon Walnut Wax applied with super fine Scotch Brite pad and buffed.

And yes, the dovetail work was tedious, but worth it. 168 in total, all hand cut.

http://sawmillcreek.org/attachment.p...5&d=1504844011

http://sawmillcreek.org/attachment.p...7&d=1504844033

http://sawmillcreek.org/attachment.p...6&d=1504844033

http://sawmillcreek.org/attachment.p...4&d=1504844011

Please don't hesitate with any questions. Thank you.

Michael

Beautiful project! Well worth the effort! I especially like the way you used thick material - combined with that height, it works very well.

2 questions.
* How thick are the boards? (They look to be about 1".)
* How are the shelves fastened in place? Or do they just stack on top of each other without being attached together?

I'd be proud to have those in my home.
Fred

Love the grain & dovetail matching!

Very nice!

Thank you gentlemen.

- The boxes are 7/8", the backs are 1/2"
- Each box is discreet, so you're basically building 6 boxes then stacking them on top of each other. They are screwed together from the underside.

Wow...that's lovely.

Nicely executed project,

Ron

Very nice work.
Jim