5 Attachment(s)
Have drawer, need a case to stick it in...
I went out and bought another "Gold plated" pine board the other day. A 1 x 10 x 8'.....$15?:eek:
Did a bit of measuring on an old drawer..
Attachment 353913
As I intend to build a second one of these. And the case to hold both drawers.
Crosscut a plank, resaw a few times....
Attachment 353914
Joint the saw marks off with a #14 jack plane. Soon had a stack of parts on the bench..
Attachment 353915
That "square" is actually four parts stacked together...only needed 6, but it is safer to have extras;)
Had four pieces to make corner posts with, and they needed a groove milled in the one edge...
Attachment 353917
Someday, I will wind up wearing that old 45 out...:D
I also did my thing with a few dovetails..
Attachment 353918
Front corners get dovetailed, back will get a dado....
Part 2 is on the way...:eek: