laser and woodworking

I recently got back into woodworking with a vengence. I am honing my skills and sticking with fine wood woodworking projects. I modified a bushing and use my laser to create cut outs in 1/8 hardboard and use them with my Festool 1400 router to do cutouts and inlays.

I can even use the laser to cut out exotic wood and insert them in the inlays.


Here is PC case I created. The fand cutout was done with one of the templates. The internal PC mount was also done with the laser.

I also use the laser to cut out drilling templates.

http://www.sawmillcreek.org/attachme...8&d=1277686388

http://www.sawmillcreek.org/attachme...0&d=1277704342
http://www.sawmillcreek.org/attachme...1&d=1277704355

Looks great. What kind of wood did you use on this project?

Here is the thing its not wood. The top and bottom is made out of 1/2 MDF and the base is made out of 3/4 particle board.

It was ment to be a prototype for one made out of exotic wood. I decided to try some milk paint and glaze to see how it would finish. I turned out so good that its now my shop computer

Im still working on prototype 2