eCabinet Systems software might be worth a try - and FREE
Some examples, using the eCabinet Systems design software:
http://i4.photobucket.com/albums/y13...hglassdoor.jpg
http://i4.photobucket.com/albums/y13...pon-TGbits.jpg
The rendering just above resulted in the following cabinet:
http://i4.photobucket.com/albums/y13...rawersopen.jpg
Months ago, after playing with the program for about 10 hours, and using the "seed" cabinets supplied with the program, I learned to use lighting a little bit, to render the following image:
http://i4.photobucket.com/albums/y13...oncabdoors.jpg
The main drawback: A somewhat steep learning curve, but the User Forum is terrific. This program will create optimized cut lists and, if you so desire, you could send the entire kitchen to a "Production Sharing shop", to have everything cut on a Thermwood CNC router.
.