Radial Arm Saw by Eumenia
Does anybody out there have first hand experience with a european Radial Arm Saw by Eumenia? Once upon a time I believe it was distributed by Inca. I searched the forums (incl. Inca) and came up with some miscellaneous facts.
I may be able to pick one up and I was just curious to get some feedback.
thanks in advance.......roger savatteri
Want to buy your Eumenia RAS
Hello,
I'm very interested in purchasing your Inca Radial Arm Saw with the extended arm.
Please contact me at: veritouch@gmail.com.
Thanks very much!
Gary Brant
Staten Island, New York
Quote:
Originally Posted by
Austin Grote
I bought one of those Inca Radial Arm Saws about 20 years ago, but haven`t used it for at least 12 years (it is in my basement,disassembled).
It has the optional long arm, about 36 inches. It uses a 9 inch blade.
Check the condition of the arm, if it is corroded or pitted the saw will be even less accurate.
The arm is stationary, the table is moved to cut angles, so if you are cutting a long piece the saw must be away from the wall.
I would not spend much money on this model saw.