best way to fix dovetail drawer
i've built a handful of half-blind dovetail drawers and on 3 of them the sides are proud of the front by about 1/16-3/32. i'm not sure why this is inconsistent...i built 5. Anyway these were made with a router and PC dovetail jig.
i do not have a hand plane so i'm trying to figure out the best way to fix these. i'm tempted to run the assembled drawer across a jointer and take a little off until they are flush but wanted to know if others run into this and any idea what the root cause could be? Just not sure why it's inconsistent and i don't think the jig is moving but maybe i'm wrong.