-
3 Attachment(s)
Cleaned up the wheel well troth and getting ready for the filler, prime & paint....
that's all for know folks...http://www.easyfreesmileys.com/smile...mileys-456.gif
until the next round....
B,http://www.easyfreesmileys.com/smile...mileys-799.gif
-
8 Attachment(s)
-
8 Attachment(s)
-
8 Attachment(s)
-
8 Attachment(s)
-
8 Attachment(s)
-
8 Attachment(s)
-
Looking very good! I am enjoying the progress.
-
8 Attachment(s)
Yesterday I decided to finish the hinges for the enclosure door and blade access box. I decided to put a little "Bling" into both doors by using a brass piano hing for both. I am very happy with the outcome and I think it will present itself very well...
The enclosure boxes both the wheel enclosure and blade access box are 11ga steel plate and the doors were made from 12ga.
I cut off the remaining bolts flush to the steel plate panel door/ the enclosure and blade access box after the hinges were mounted.
http://i266.photobucket.com/albums/i...arepopcorn.gif
B,
-
6 Attachment(s)
-
Finished the rear blade guard today and installed the handles.... http://www.contractortalk.com/images...es/thumbup.gif
Only item left is that upper door panel and the rear mesh guard... and then I can start with the finishing.... I am almost home....... http://www.contractortalk.com/images...es/thumbup.gif
Pictures later tonight..Or tomorrow ..I am on the run.......http://www.easyfreesmileys.com/smile...mileys-469.gif
B,
-
Keep it up, she is looking great!
-
-
8 Attachment(s)
OK.....
next dump of snappers...
Here we go!!!!.......
B,http://fototime.com/99CB340AC2B6105/orig.gif
-
7 Attachment(s)