Per current code the ground should be bonded at the disconnect and you should have a 4 wire feeder going to the house. If that is the case than it would be easy and up to code to tap on after the...
Type: Posts; User: Lewis Anderson; Keyword(s):
Per current code the ground should be bonded at the disconnect and you should have a 4 wire feeder going to the house. If that is the case than it would be easy and up to code to tap on after the...
Is there a disconnect at the pole or just a meter?
Google "grounding vs bonding" if you are truly interested. There is a lot of information already out there so no need to clutter up this thread further.
This is incorrect. You need both ground rods and a ground wire back to the main. With the neutral and ground not bonded(which is correct) at the sub-panel you basically have no short circuit...
I don't know of any electrical fitting that will fit through a 3/4" hole. A 1/2" conduit nipple is 7/8" od and conduit is the only sort of extension that is made. So I think either way you do it...
Assuming you are using a regular weathertight box with threaded holes...
Can you not take the box off the wall, put the clamp and wire into the box, tighten it, and then remount the box?
If not...
The annual SGIA show typically has all the major players in attendance. The ISA show also usually has quite a few manufacturers as well, it seems to get more and more graphics orientated every year.
I use handbrake to covert files for my Panasonic.
McLaren MP4-12c
Thanks for the replies. You have pretty much confirmed what my gut what telling me.
I am working on the design for our kitchen cabinets and have a few questions regarding the drawer fronts. The cabinets will all be CVG douglas fir fronts with Blum Tandembox internals. The design...