Search:

I have never grounded one inch of my PVC duct work.

I think you nailed it! ;)

Yes sir. I have used plastic pipe for dust collection in my shops for 25 years without a problem. That is a reliable enough test for me.

Agricultural irrigation supply yards will have it.

When I heard the news my first thought was "drug overdose". The autopsy looks like that will be confirmed as the cause of death. At this point it is unclear how much responsibility the attending...

After about 25 years of testing I can confidently say no worries here.

I mounted my DC unit outside in a small shed attached to the back of my shop. A 4" pipe runs through the shop wall into a 55 gallon drum. The 4" exhaust extends out of the side of the shed about 12"...

I don't really care for the Ruger 10/22 due to it's short length making it awkward to handle. However 22. caliber rimfire rifles are cheap to buy, fun and inexpensive to shoot. I personally am fond...

I ran mine down one wall, 4" SD PVC. The far end is about 4' off the floor the end connected to the outside DC unit is about 3' off of the floor where it goes thru the wall. The run itself is about...

Ryan, I know two guys who have had problems with the tops on their Steel City saws.

John, my source is the following is an inaccurate statement:



Hell if you want to let the two guys you met drinking beer tell you different that's fine with me. (Did one of them happen to have...

Well John if true then they flat out lied to you.

I ran a test last night with my cast iron topped table saw. I opened a can of beer and left it on the table saw all night. This morning when I arrived at the shop the only issue I had was the beer...

Good point!!

Blanket statements such as this are always false.

Here's a post quote from another forum:

"I happened to speak to a Steel City rep the other day and he told me that the chipping in the miter...

It looks like talent to me.

Yeah, I use their (HF) 18-gauge brad nailer. I like it better then my Porter Cable 18-gauge so I traded the Porter Cable gun for some work. I got my HF nailer on sale for $13.00! I've replaced it...

Pretty darned nice!

I plan to (in the next winters months) replace my aging Band Saw. My current Band Saw I will convert to a dedicated metal cutting machine. To do this I will have to slow the blade down considerably,...

It looks like you have some good choices there Will. For a first TS any one of them should do nicely.

Australia.

I think the Panasonic 15.6 volt drill is the finest available. It is small, lightweight and has the power of everyone elses 19.2 volt drills (or better). At $199.00 it's not cheap but as soon as you...

Looks good Jason. I will soon have to make a couple up for myself.

Damn, the fence sure looks good in the picture! ;) I will keep it in mind and if I don't get the cuts I want I will pick up a Kreg.

I like those. Well done.