Search:

Ah a thread I can actualy weight in on. We just went though the same thing we tried a samll 24L compressor but it was no good for my large machine we now are using a 100L V twin belt driven...

Joy yang can be reached with Skype username wm03511 his email is wm03511@163.com

None of my screws were loose we had a faulty part and dodgy wiring. Glad my experience could help someone else too...

Hi All just thought I would check in. I touched base with Joy Yang who use to work for Shenhui but now owns his own buisness making laser machines. It took 5 hours with him and my dad and electrical...

Congratulations. Have fun once you get one the possibilities are limit less! I bought mine for leatherwork but since have cut ply to make signs and acrylic for my husband paper and card plus a fair...

Ok so my dad came over this morning and checked a couple things and they were all good we had a bit of a play with the control panel on the machine and set the minimum to 98% and maximum to 98.1% and...

Khalid I have been cutting 1.5 - 2.8mm leather depending on what i am doing its prefinished leather not vegetable tanned. I have also cut 1.1 vegetable tanned on it as well usually at 30mm and 90%
...

Its a bit of both dave.

Today the laser would not work at all. Yesterday is worked perfectly for 2.5 hours cutting 4 full decks of material then when i hit start on piece 5 the mA dropped and it...

Mine does noe have safeties on the doors well i can not see any.

water flow switch? I have the CW5000 water chiller it plugs directly into the back of my machine. It is also very quick to beep if...

you wouldnt beleive it went out to the shed this morning and the laser worked perfectly for 4 deck fulls of work then it started cracking the shits again!

The laser is working at 28mA when it is...

Mi have emailed shenhui a few times they are going to pass the info onto the tech tomorrow. I have been out to check the tube for brown/yellowing as you suggested and there does not appear to be any...

Hi everyone,

We have had a blissful start to using our laser but now we are having issues. The mA meter on the top of the machine when working at 20mm and 90% use to bounce around in the 30-40...

Hi Khalid,

Thanks for the info its very helpful. I always use the compressor that came with the laser. I cover all my leather before I work on it save the heart ache then clean with water and dry...

Dave have you done this by any chance? Anyone help out here? How do I make it happen. What do I need?

What are your solutions for getting minimal burn on the edge of your works? I am working with leather which entails huge careful clean up so you dont dirty the skin.

I have heard you can hook up a...

Thanks for the info james is SUPER helpful. It has not stopped since I think it was because I have placed the image just too close to the edge. We have been running .1 on the interval. I will try...

Thanks for the info George we are currently cutting leather in 1 pass with speed at 20mm and power at 90%. Does this sound right? we are getting a beautiful engraving at 100mm and 15%power

The...

I can not seem to add an image but when running a 40mm x 40mm graphic on scan/engrave last night it stopped 1/3rd of the way through and I go this message "No Enough Extended Space Please Esc" Any...

Hi Guys,

Thank you so much for all your help. Got it focused correctly tonight and made our first cuts. I am cutting leather of a thickness of 1.2-1.5 to get it to cut all the way through on the...

Perth Western Australia :) Hubby and I are 2 blind people poking in the dark. We are trying our best not to ask stupid questions but the you tube vids and the manual that came with it leave alot tobe...

I got an orange focus stick with the laser i recon its longer than 21mm though more like 40mm will double check though. To use it i put it ontop of what i am cutting and under the laser head. correct?

George wish I had read your post before I headed out to the shed this morning!

It seems we have the beam all lined up now but the dot its making is almost 5mm in size. its running the 80w reci...

Alrighty. So I think we have the alignment sorted. my question is the laser makes a dot thats about 5mm in width is this right? how do i make it so it makes a small/fine dot. right for cutting?

Matthew you ROCK the key knob did the trick! We now have fire! Its hard when the knob your looking at is not in the manual or any youtube videos! mirrors need aligning but at least now we can do it....

Nope we get zero action. Not sure what to take picture of really? What do you need?

Hi Everyone,

So our laser arrived on friday unfortunately I had to work friday and saturday so only just got to comissioning the machine today. We have installed all the correct attachments and...