It is unlikely the head is moving and causing snipe, most of the time on this machine the bed rolls are set too high. With properly supported stock,sharp knives properly set and a well set up machine...
Type: Posts; User: Charles B Wilson; Keyword(s):
It is unlikely the head is moving and causing snipe, most of the time on this machine the bed rolls are set too high. With properly supported stock,sharp knives properly set and a well set up machine...
Fletcher and previously " Fletcher Talbert" (sp?) made and still makes Edge profiling machines both single and double sided models,and I think are also building machinery for cabinet doors. From the...
I vote for the Dewalt also.
But with that said for the application you described the ridged would be my go to router. Its smaller has a decent depth adjustment and with a clear sub-base and built...
Its a sliding table for a mini max shaper , looks like a T110 or smaller.
CW
You mean a hood like this?354256
It looks like a lock knob?
Does it look like a key of some type (not a standard key) maybe a hex or similar shape that would allow the knob to operate the latch.
CW
Just completed a pair a few weeks ago. Like Ken we use the rixion pivot setup.341970
CW
A line boring machine is not what you want as already mentioned. A vertical boring machine is the machine to do the job you describe. I would look for a used "sicotte" or maybe a "cemco".
Keep in...
The first item is part of a hogging head setup (looks like its missing the full blade)that would be used on the trim station on a through feed machine such as a tenoner.
CW
while that is a flat belt I don't think you would want to lace a splice into one.
http://www.mcmaster.com/#flat-belts/=y2lu5s
this is more like it
CW
Either one will work,the detail from Danny,s book only requires one bevel rip cut while the other takes two.
I find it easier to install /line up the single cut style.
CW
Here is one source.
...
I see it listed in a 1945 flyer from star machinery.(a dealer)
If that helps any
CW
This works well.
http://www.titebond.com/product.aspx?id=c9121dfd-2a9d-46d0-bd6d-c183e64bd0cd
Bonding prefinished to prefinished will extend the clamp time .....overnight or longer depending on...
In addition to all the exhibitors there is the -"Fresh Wood Display" and the "2013 WorldSkills Cabinetmaking Qualifying Trial ". On a lighter side there is the belt sander races, and don't forget to...
I vote for poplar
Charles
Dave,
This would be a good start.
http://www.uniquemachine.com/files/pdf/tooling/toolingref4p1.pdf
CW
Looks like a double row self aligning ball bearing.
http://www.bearingstrade.com/self-aligning-ball-bearings.html
CW
Chris,
The Unitronix / Polamco Machine line was manufactured in Poland. As I remember it is a solid no frills type of machine. I have never used a jointer of theirs but have played with a saw and...
Woodworker's Emporium
5461 Arville St
Las Vegas, NV 89118
Phone: (702) 871-0722
Woodworker's Emporium
125 N Gibson Rd
Henderson, NV 89014
From my experience there will be no AC for setup. I will be upstairs in the central hall Saturday and Sunday and I am not sure what it will be like. I am optimistic all the big wigs will have it some...
Thanks Nancy,
I was hoping Art would take the opportunity to elaborate some...
Be careful on the south end of the Strip. If it's not a car bomb it's a shooting. What will be next?
On a...
Art,
What booth number would that be?
Charles
Aaron,
Darn if you were in southern I could help a little more.
But try MacBeath (I heard they sell small quantities)
Also you have a Woodcraft store in the area and Timberline I think
...
Hello Aaron,
What part of Utah ?
Charles