Search:

+1 what Brian said on cutting diagonally...

I became interested after building some poker tables out of 3/4 plywood, by just using a jigsaw and electric staple gun, during the big poker boom of 2004. Then got a craftsman router as a present...

Is there a way to tell if the stones are pre-soaked in oil, just by looking or feeling?

The smith tri-stone that i have, I used up all the oil that it came with. It just soaked right into the...

I bought one of those stone sets were you rotate a 3 stone rig to go from grit to grit. And when I put oil on the coarse stone it just disappears into the stone. I stays on the surface for a little...

So I was looking around the web and found they have a Byrd Shelix Head for $350. Is it worth it to put it in this jointer??

I found this on CL --- They had 2 different jointers... one 4" I think that connected to a Shopsmith... not real sure...

But I scored a Grizzly G1182 6"Jointer it has a date on the label says...

After reading this post, I check around the net... I found a discount code for it and ordered it for my Delta 36-979. The site said it had one already ready for it. But Eric, the fabricator,...

Below are the pics of my saw after I cleaned it up and added a Delta T2 rail and fence, mounted the power switch to the left side of the rail. Bought a Incra Miter Gauge V27 to replace the stock...

double sided carpet tape

Because the tag was missing on my TS, it took me awhile to kinda figure out which one it was... The closest model I came up with is... 113.299131
I asked about it on OWWM, but never got an answer...

That looks like the saw I bought used a year and a half ago... I wasn't able to find the model number on mine because the metal tag was missing on the back of the saw. It's set up as 220v. I moved...