Search:

Michael M. - The curve of this skew does have a continuous curve unlike the Lacer version. After viewing your pic it certainly does have the appearance of a Negative Rake Radius Scraper. I did not...

John - Your video is one I have viewed several times. Thank you for that. The skew, size and bevel, you are using toward the end of the video is what I thought I was getting and is what I am looking...

Learned something new today...resizing and uploading photos. 1st pic is length of bevel I referred to. 3rd photo shows the 70* bevel angle of the 1" radius skew.
4th photo is the 1/2" skew which...

I was not clear on the 1/2" skew. - It worked great out of the box. Normally a new tool requires a little sharpening/honing. As for the 1" Skew it is advertised as a Raffan Radius with a Henry Taylor...

Mike - The radius, toe to heel is at 70*, perfect. The cutting angle is also at 70*. not conducive to good peeling action. Definitely not a scraper. I guess I had just assumed that there would be a...

I have a question on the Richard Raffan 1 inch Radius skew I just received. The Bevel Angle is 70 degrees.
The skew is 3/8 inch thick with a Bevel length of 3/8 inch. This doesn't follow the 1-1/2...

The Johnsons paste wax I use is found in the housewares section. There are two types. The one in Housewares is without Silicon and has the red stripe one the Yellow can.

I agree. I probably pulled up on it to hard at some point as well. The new parts work smoothly now where as the original seemed to stick when pulling up and rotating. Now everything is good - except...

Dave, I posted the part number in my reply. Just go to the Ereplacement site and type in your model number. Or, if I can do it here - I'll try....

If you are referring to email from the Bosch service dept. I spoke with them over the phone - no email. They were going to send me a service slip (7-10 days) so that I could send my jigsaw in for...

I decided to replace the Top Handle Assembly. Ordered the parts from ereplacements rather than sending the entire tool in for repair. Switched out the top handle assembly myself and it now works like...

I think all the newer models have the new blade changing quick release, which is located up front. A flip of the lever ejects the blade and ready for a new blade.
1590, 1591, and JS470EB are a...

I called Bosch. They haven't heard of this problem before. According to them I need to send the jigsaw in for service so they are sending me a service slip. Means I will have to send it in if I want...

I will call Bosch on Monday for a solution. Hate to get rid of it but would like nothing more than to have a reason to pickup the 1591.

thanks all

Need advice on 1587vs locking knob. When I pull up on the locking knob to loosen the blade the black knob pops out of the handle. Started doing this a year ago. Made do with the problem but would...

Thanks guys. I guess that is the route I'll need to take.

Thanks Chris, that confirms what I have been finding in my research.

Thanks Lee,
Sorry, but I should have been more specific. I need to replace the existing mounts which would require that similar to side mounts - 1/2" height (or thickness).

Already check...

Is there such thing as full extension undermount drawer slides? And where would I find them?
I would like to replace the undermounts on our (my wife's) kitchen cabinet drawers. Seems that what we...

Well I hope Woodpeckers hasn't reduced their quality because I just ordered the PRL-V2. Had enough with the kneeling down, unlocking, knob turning (fighting) and then repeat for a 1/32" adjustment. ...

Thanks Mike, How did you hear about Woodpeckers having a sale. I'm signed up with them for email notifications and have not received anything on it.:confused:
I think I may give them a try. Haven't...

Thanks for the info.
After reading these threads I went to the Incra site (don't know why I didn't check there before). Not only is the PRL-V2 $30 cheaper at Incra but it also includes five metal...

A lot of questions here but I am just a couple of days away from purchasing the PRL-V2 and Milwaukee 5625 for my router cabinet setup.

While researching I found two versions of the PRL-V2 at...

A question for those who have the Bosch 1617 installed in a PRL v2.

Are offset wrenches or collet extensions required for bit changing above the table?

+1 for the Oneway Talon.