Hi Vaughan
When you install it the compatibility mode must be set to Windows Vista Service Pack 2.
Duane
Type: Posts; User: Duane Parcells; Keyword(s):
Hi Vaughan
When you install it the compatibility mode must be set to Windows Vista Service Pack 2.
Duane
Hi Ricard
I've had the same problem on and off. The usual cause was a job stuck in the print que. Also, if you haven't already, refer to the...
An article in the Saturday 10/24/15 of the Seattle Times states Glowforge raised $25 Million in one month.
Does anyone know how this thing is vented sitting on a kitchen table. Cheap plastics are...
Notice from a scan of my computer by Windows 10 says that CorelDraw X4 will not function under the new OS. Haven't seen any other mention of it yet but it won't be long if it is true.
Hope...
Hi Declan and welcome to the Creek
The CO2 is the gas your particular laser uses to produce the laser beam that does all the work. It is a (tube) integral part of your machine and is not something...
Hi Mark
I have had this issue come up with files that start as dxf format (autocad). Everything from what you explain and even worse behavior. Have you tried using the Smartfill tool? fill your...
Sorry, forgot to included the older formats. If you need to go older yet, let me know.
Hi Julee
This question came up a few years ago and Epilog said at the time there is no such "timer" built into the software or hardware. The standard for selling a used laser has been to rent or buy...
The rest of the files..... Please contact me for the pdf's and a few notes on the project. Note: cutting the gears on a laser is easy. Turning all the parts on a lathe to tight tolerances is where...
Here is the first file. I am still gathering the rest.
Parts are separated into 3/8', 1/4", 1/8" and the Delrin parts.
Here is a link to answer some of your questions.
http://garysclocks.sawdustcorner.com/clock-gear-math.html
duane
Hi Kasey
I've made a couple. This is a link to a thread on clocks a while back. I have the files here somewhere modified for laser. Let me check about posting them. Available on the net as gary's...
230061
Here is the file zipped.
I ran it but the file is too big to post. Let me know where to send it or tell me how else to get it to you through here.
Duane
Hi Mike
For light weight items like wine glasses, egg shells etc. I use children's play dough packed inside. Also use rubber restorer made for laser printer feed systems to recondition the rubber...
Hi Sandy
I recently uninstalled X3 but if I remember right it is the same as X4. In your object properties flyout click the advanced button then drop down menu for width and units, you will have...
Hi Jim
You forgot to post the link but I'm assuming you mean this...
Just wanted to say how nice it is to have the Epilog Company support their machines the way they do. My machine is well past the warranty period and they still will not stop until you are up and...
Hi Bianca
I turned both in to vector files then..... the ones on the right are for cutting..... Not sure what you are trying to do here so let us know if you need further help. If this is your...
Hi Ed
I've done my fair share. I went back and found an old post that may help.
http://www.sawmillcreek.org/showthread.php?104278-Mirror&p=1079365&highlight=#post1079365
Duane
Started playing around with the wooden hinge that was posted about a week ago. After spending a little time deconstructing it to allow for any size to be made I tried to come up with a way to use...
This logo is a mess and next to unusable. The ones on the internet are worse.
This was the best I could do. Might want to remove the lettering and replace212786.
Hi Andrew
I have cut a large amount of delrin gears. It's been about a year since I've cut it but my notes say for 3/16" 10 speed 100 power 500 freq. 30psi air, at standard focus. My Machine is 75...
The bamboo skewers are disposable. I buy packs of hundreds and lay them on the vector table and cut them to length with the laser (use tape to hold them together during cutting). Soaking them in...
I made my pin table out of baltic birch ply coated with paint saturated with as much silica sand as it would hold. The pins.... I use bamboo skewers with the ends soaked in water for an hour before...