Search:

thanks ! You have inspired me to build it. I started cutting parts last night. Just need to drill and tap,then complete the welds this morning. If you could send me the pdf file Kurt, that would be...

Finally moved into our new home we built a couple of months ago.My tools were in storage for at least 2 years, with some at a friends shop 40 miles away.Some how,while trailering them to their new...

Chet, there should be approximately a 30 degree temperature rise across the condensor coil. This will take into account that most window units use a "sling-a-ring" type of condensor fan blade,where...

Cliff, I'm assuming the capacitor caused the motor windings to fail as well? A capacitor is usually a 5-15 dollar part.





BTW...I'm a licensed HVAC contractor. If you can get me the...

I agree with Anthony. Being in the A/C biz for going on 30 yrs....my educated guess is, if the 24000 (2 ton) unit is short cycling, and the 17,500 (about 2.5 ton) unit didnt keep up, then I would...

Bill, that switch will be fairly expensive if purchased at a electronic/electric parts supply . A cheaper alternative ....I'd look for a Window A/C unit rotary switch at a HVAC wholesaler. Most have...

All good suggestions Patrcik.....except armor all. I did that to my new '97 kawsaki kdx 220. Soon as I got on it, rolled on the throttle, the bike almost shot straight out from under me. Seat was so...

I apologize Tom, you are absolutely correct. I glanced over your post and I now realize you were talking about high and low pressure cut-outs. Yep, very few come with those anymore. Most heat pumps...

Bob, most new programmable t-stats have a manual "Hold" button . This overrides the program feature until the user switches it off.If you raise/lower the temperature manually without pushing hold, it...

All homeowner a/c compressors in the last 20 years have an internal overload cut-out (klixon). It's basically a bi-metal switch that warps when too hot and breaks the ciruit. If the fan motor is...

-I would add, try and take a MSF course right away. They sometimes furnish the bikes too. If you know anyone that would loan you a dirtbike,or let you ride with them a few times, try to do it....

-Several good brands out there...and I've installed most. The main thing if replacing unit, is to make sure you get a Copeland Scroll compressor with 10 yr warranty (Compressor only ) I have had good...

Nice bike Dennis !!! I too started off on a Mini-trail 70 back in about 68 or 69. Been riding dirt bike s all my life, so I cant get used to anything but a dirtbike riding position, hence the BMW. ...

I hear ya Jason....I told my wife......"Wife, what ya doing? Arent you skeered of messin up those gams? Nope, she says...I needs me some tan. So wasnt any arguing with her. A few pee gravel miles...

Not much to add....except just wanted to say my wife and I road the Talimena parkway out of Mena Ark a couple of weekends ago on my new BMW. (with a dry clutch :) ) 90246

Love to ride up there...

Crap......I just looked and our washer/drier is a Whirlpool Duet. And its about 4 yrs old :(

Oh man, this is a slippery slope guys....wait until you try the festool underwear.They have a place for everything. Its truly a system.

I've got the new generation 16" resaw and 4.8hp MM. Just wanted to chime in too...I'd definitely buy it again. Cuts like buttah.......

Bill, I read that article. Thanks!

Also read one of the articles linked at the side of the page...

My best bet would be to check out a bearing supply such as King Bearing or Motion Industries. Some of these companies sell the link belt. I would expect them to be lower priced than the wood...

It will work...go for it.


Depends on how large an area and/or how easy the epoxy comes up,how much time your willing to spend,etc...you may still end up renting a large floor grinder for the...

I am missing two fingers on my left hand. They are the pinky and pointer fingers. Never had'em , as my mother took a morning sickness medicine whilest carrying me called thalidomide. This was in...

Jim,
I have the G9860ZX 12" jointer . It's published foot print should be accurate. The fence does not go much further back than the start/stop tower. Its a great jointer BTW
Randy

Jason, is this a filter grill? One in which you pop open the front grill to replace the filter? If so, then take out the grill...usually its screwed in around the inside perimeter. You'll do this to...

Yep.....what Lee said. Backing into something with a trailer is not that far removed from doing it without a trailer. He probably felt it. If the dealership wont co-operate, makes me think it could...