Search:

I had the same problem as you have experienced and found it to be my technique had changed , once that was corrected low and behold straight edges , though I was really frustrated until I realized...

Thanks for the response thats what I fiqured but in reading some other posts one member indicated poplar did some strange things over time but did not elaborate on what happened to it.

I`m attempting to build a Cherry Tall chest and would like to know from the fine furniture guru`s what would be the best selection for secondary wood for the dust panel frames maple , poplar , ash...

I guess I will have to disagree , its a matter of preference my first deck I butted them together living on the Oregon coast amongst pine trees needles , maple seeds, leaves etc. would plug the gap...

Thanks for the info I will look into it , I was afraid that would be my only solution............

I have been using shellac more often as my first choice as a finish lately and have tried ( not very hard ) french polishing but I guess my desire is lacking and looking for something a little less...

I`m building a valet jewelry box and it has a leopard wood top , is it possible to achieve a glass like finish with this wood and if its possible what product and steps would I take to accomplish...

Very generous of you ,thank you very much. U S Navy 58 to 62

Hi from central Oklahoma:)

Sent mine today PayPal

Been a while since I`ve been able to work in my shop ,here's some pics of my first wall clock made for LOML had a problem her wanting it stained and myself natural finish so I let project go for...

The D4R replaced the D4 which had steel clamp down bars in stead of aluminum which the D4R has .The D4R has a bigger capicity thickness wise compared to the Super jig and a couple of other things you...

I figured they were dropping the price because of the new super coming out this month which is listed for 329.00 for a little extra you can do a few more things plus capacity wise thickness that is

Rockler has the the D4R on sale for 399.00 until 7/3/07 for those in need their oversold at the present time won`t bill until shipped

John I`m no expert in woodworking but I don`t see any need to joint both edges.I joint 1 edge and 1 face square to each other and rip to final width on the table saw and plane to final thickness with...

:)Thank`s men I have really been dragging my feet on finishing this clock for the LOML and I think she is starting to see the crime of covering such a beautiful wood with dye or stain I like all the...

:rolleyes: Randy you might try calling an architectual firm and find out who they use to service their blue print machines they use commercial ammonia good luck

Thanks Jim always appreciate your replies to forum questions and abundant amount of knowledge?what would be the best way to apply the initial coat of dye ,I assume spraying would be the ideal...

I`ve built a Edmonton wall clock for my LOML out of cherry but she wants it a darker color I`m thinking of maybe adding cherry dye to base coat of Blo and using clear shellac as a toner coat and...