Search:

I had a similar problem with my AC-41. It turned out that the blades were worn out. This made me think the tables were out of coplanar. See my recent post in the thread -
Hammer A3-41 Brand New -...

I have owned my A3-41 since 2006 and it’s a great machine. However, I went through hell trying to get it readjusted. Some of the problem was self-inflicted because my problem was due to worn out...

Thanks to everyone who answered my call for info. And I learnt something - the capacitor specs are on the motor plate. It’s also interesting that CEG USA didn’t now that!
Two more questions, do...

Hello,
I have a MiniMax MM 16 bandsaw and found one of the capacitors has leeked/melted. Because of this I don't have the specs to find another one. MiniMax and the motor manufacturer, CEG, have not...

I checked out the web site and found SketchList 3D is not available for Mac OS X which is very disappointing. In the past I have tinkered with computer programming and know that a Mac version would...

This is a three wire 120/240 V circuit. The only way a fire would happen is if you exceed the ampacy of the conductors. With a 30A breaker, generally you should have 10AWG wire. You might want to...

The top bearer of your base should line up with the right edge of the support block which is the part that goes between the bench top and the shoulder vise arm. The top base bearer and the support...