I have to agree. I bought a router kit off of the net and it was missing a few of the accessories (the 1/4" collet and the bushings). I emailed them and they sent me out the missing parts no...
Type: Posts; User: Clint Malone; Keyword(s):
I have to agree. I bought a router kit off of the net and it was missing a few of the accessories (the 1/4" collet and the bushings). I emailed them and they sent me out the missing parts no...
I had no idea they were gonna start with a big one. I will probably buy a sawstop cabinet saw and bandsaw (if it is as good as this griz) in a couple of years. I just CAN'T afford to lose any...
I love amazon.
You got it exactly backwards.
The idea you are talking about is linear velocity versus angular velocity. The angular velocity will be the same for both size bits. The linear velocity will be...
I went through this same decision a few months ago and was somewhat leaning towards the minimax at first and then towards the laguna after reading about all the switch and electrical problems the...
I had the same thing happen on my jointer about 2 hours ago! I think I need to locktite the set screws, but mine is all dried up. Will have to buy some more I guess.
I have a PM 15" planer and a Grizzly G0586 jointer and they seem to be of the same quality to me. They both do their job just fine and I haven't had any problems with either of them. I think you...
Unfortunately, none of the saws under $400 are really suited for resawing as their primary task. I would look around for a used saw. When it comes to resawing, the more HP the better. Also, choosing...
You may want to look on the I-Cove auction site (or whatever that big auction site is called). Many times they have right angles for sale w/o a battery for pretty cheap. You can probably get one...
I thought those flat screwdrivers were for opening paint cans...you mean they make screws that match?
I had just about all the ridgid tools because when they switched from gray to orange, they put them on super sale at home depot (read $150 for the jointer, $175 for the bandsaw, $150 for the planer)...
Umm, he said "if a person is tilting the table on a regular basis"...meaning that you would have to give up the better support in order to allow for the tilting. If you are not tilting the table...
Beautiful work.
Thanks for providing the forum. Paypal sent.
If you don't like changing blades, one of the spiral cutterheads like the byrd shelix and the grizzly knock off of it use carbide inserts that last much much longer and are changed using a Torx...
I have been very pleased with my Bench Dog Prolift Ni. The new jointech one looks nice. I have never really heard anyone complain about any of the lifts though, so you will probably be happy with...
http://www.grizzly.com/products/G1052
That one looks to be the best bench top saw I have seen.
You can still get it on ebay.
I make mine from 5/8" MDF and sand it down a bit on the drum sander. Works fine.
Sorry for the direct link; there is a post on woodnet from 5/14/05 by John Fry that describes in detail how to make one. Hope it helps.
Have you thought of using refrigerator gasket material with a magnet in it on some thin steel?
Well, it may be worth a couple of $200 plane rides to go test drive them both before committing to buying a $9000 saw.
I agree. It is probably a "pear stain" or some other marketing gimmick.
Doesn't look anything like the pear that I have seen.
Well, as you can see, I have a resaw fence on mine that is very easily adjustable for blade drift, but I see your point. Let Shiraz know, he would probably appreciate the feedback and likely make...
I didn't even notice that the resaw on the 506 was only 9 3/4". If you make it down to TX, you are welcome to come try out my G0566. I really can't imagine that the Euorpean saws are $1000 better,...