I believe you are looking for Scotch 468 tape.
Try Construction Products.
I have been purchasing it from them for years.
Construction Products Corporation
305-D W. Torrance Blvd
...
Type: Posts; User: Robert Tepper; Keyword(s):
I believe you are looking for Scotch 468 tape.
Try Construction Products.
I have been purchasing it from them for years.
Construction Products Corporation
305-D W. Torrance Blvd
...
There are several you tube videos that you might want to watch. Weld is confusing but it does work well, just takes a little practice.
Good luck.
Robert
I run Corel 7 and it has more capacity than I understand. I am very happy with it and also running windows 10.
Robert
Much more luck in the coming years!
Robert
I do a lot of red/white 1/8" Rowmark Laser material.
I clean everything with denatured alcohol and have good results for cleanup.
Robert
When the machine is on and not running, can you move the laser head or is it a nice firm tight feel? If it moves, then possibly the tension on the x - y axis belts are not tight.
I have been...
Congratulations on you investment. The 400 is a fantastic machine.
Robert
You can purchase vector material from PLASCORE. Look them up on Google.
Robert
I splurged and purchased the Atmos system. It works exceptionally well. I do a lot of vector cutting as well as raster engraving. One filter lasts about 2 months and they run $335.00 each. A little...
I have one machine, a Rayjet 300. My rep does send me an e-mail every few months to see how the machine is performing or to keep me up to date on any sales promos.
I can get in touch with him by...
Your projects are very nice and creative. Mine are all boring! I do the same three jobs all the time.
Robert
I apply a full coat with a brush, run at 100%, that is 80 watts for me and a speed of about 10%.
Don't do a tremendous amount of stainless but I have had good results.
Best of luck,
Robert
Have you tried silicone adhesive, it comes in a squeeze tube.
Robert
I meant the right side door.
Sorry!
Have you checked inside the machine to see if the adjustable screw is open enough to let air through? This is on the inside left door on top of the air compressor.
Hope this helps.
Robert
Hello Ali,
First of all, welcome to the group, there are some exceptionally knowledgeable people on here that have helped me.
I run an 80 Watt Rayjet and i run my machine almost 12-14 hours a...
Thank you for the input. Where does one find a "magic eraser".
Thanks in advance,
Robert
Good Evening all,
I am using 1/8" thick, Black/White Laser max from Row mark. I keep getting residue that will not clean out when I raster engrave.
I have tried several power settings, the best...
You might try contacting hospitals, nursing homes and health care centers. They are always in need of rubber stamps, name badges, door signs, directional signs etc.
Just a few simple sales calls...
You are getting great advice and opinions from many knowledgeable people.
You can get a Trotec Rayjet for 19K and if you mention you are a member of SMC, they will knock off an additional 2K.
...
I agree with Bill, it sounds like you are using too much power. I also use denatured alcohol for cleaning.
Just break the surface so it can be read, raster engraving deep is not always necessary....
Raphael,
When calling for tech support with a problem as serious as yours, Trotec will start by flashing the firmware to be sure that your software is the latest version and that it has been...
Rahael,
That is highly unusual for a Trotec, almost unheard of. What is the problem? Has your salesperson been made aware of the problem? Are you in touch with tech support?
Sorry for all the...
That is a good record Mike. I am looking to purchase a second machine by the end of the year, either a 300 or the new 360.
Just have to see if the demand keeps strong.
Robert
Last week I had a stepper motor stop working. Trotec support was outstanding. They sent the replacement overnight and I was only down one day.
Taking the motor out was a breeze, getting all three...