Search:

Another option would be to use wide 8/4 stock, flatten one side, rip it down the middle and then glue it back on itself like closing a book. One of the gluelines will be virtually gone because of...

West Penn Hardwoods can also get you the few board feet you need. http://www.westpennhardwoods.com/static/index.htm

I too have the Porter Cable hinge butt template kit. I got mine off of ebay for ~$150. Dead on accurate and a breeze to use. For the locks I got an Kwikset template off of Ebay that is as old as...

Love it and have no regrets. I still use my Leigh FMT jig, but nowhere near as much. I can slam out a cabinet door (mission style) in under 5 minutes and have joints that will not come apart for any...

How much do you need and do you want soft or hard curly maple? Depending on the quantity needed there are different places I would recommend.

I would second the recommendation of Freightquote. They find the best rate based on a number of factors. You will want to pack the item up really well. As others have pointed out bolt it to a VERY...

Blum Tandems #1, and if pressed Accurides, although Accuride did come out with a side mount self closing slide that is pretty darn nice, especially for the $$$. Woodworker's Hardware.com is the place...

I am not sure about the 9860 specifically but I have a 12" Grizzly Professional jointer. I have been around a zillion other big jointers and I can say that all of them take up space where the fence...

I have a a vertical panel saw so that helps a ton, but when I don't want to use the panel saw I used masking tape rubbed down real hard on the place I want to make a cut. Two layers works better than...

The only undermount slides I use are Blums and I have several drawers in my house that are big enough to put a dead body in. I have kitchen pot drawers that are 47" wide, 13" tall and 24" deep. When...

No offense taken. I am a bit of a walnut freak and have been around it a lot of my life. I have a ~24" log drying in my brother's barn in upstate NY that is from tree I planted (from a nut) when I...

I was there today and there is a wrestling tournament going on so there are highschool kids all over the place. Millions of them. So if that is still going on, it will be busy down there. Across the...

I may have heard the price wrong for the jig. But, both myself and the person I was at the show with thought we heard $595. If that is true that is very pricey. I would hope that the guy was saying...

I saw one today up close and personal at the St. Woodworking show. First off they had a bunch of them (Acme Tools Booth), and I think I heard the guy saying they were having a "show special" of $595!...

Dat's a good deal. I am comtemplating getting a second saw for my shop that one would be ideal. Temptations..............

I can't find the article (at this moment) about the tree but somewhere I saw a newpaper article about the tree being cut down and the associated flack about that. It was certified and one of the...

It's too embarassing to post photos of, but I just spent about an hour and a half (lots of interrupted time so that dragged it out) to make a jig so I can use a laminate trimmer to route out a place...

As I said it is not fake, that is the real deal. Go to the www.metacafe.com and search "largest walnut" and you will get the video of this tree being cut down. This tree was indeed over 7' across,...

I've done those on my Leigh M&T jig by setting the router bit just the height to remove the bead. Then I use the router to clip off all of the bead up to the base of the 45 degree angle. I take the...

St.Paul River Center. I am not sure of the hours but usually they are from 10 am to 6 pm or thereabouts. The show runs Friday, Saturday and Sunday if my memory is correct. I don't have the flier here...

Yes that is the real deal. Those flitches are from the world's largest walnut tree (supposedly) that was growing next to a road in Oregon (I believe). I can't get the page to load but if you go to...

Blammo, first try I got 25% on their web page. Can I print out the page and take it to my local store for the 25%? I was going there at noon today for some sundries and this would be very nice.

Global Teak has some decent mail order prices. They also have any thickness you would ever need. I have not ever ordered from them, but I was recently hunting for some 16/4 stock and they had it. ...