I called my insurance agent about my roof. After a long discussion, he informed insurance would be going up this summer and not to be alarmed Said it would be a huge increase…
Type: Posts; User: jack duren; Keyword(s):
I called my insurance agent about my roof. After a long discussion, he informed insurance would be going up this summer and not to be alarmed Said it would be a huge increase…
It’s wind an cold… Trying to cut ice and water and get it started..
Stripped the roof..
Problem is when you have 5-10 guys in the shop, one won’t wait. So if you do a lot of laminate you want to have sticks handy. Best I have used was 1/4-3/8 aluminum rods. Most shops use dowels..
I did it again. Arguing with DIYers..
An out feed table doesn’t have to be perfect. I built a 2x4 frame and covered one side with MDO. I use two 2x4 saw horses. When I run my table saw it’s just below the saw surface and doesn’t restrict...
Cardboard is kinda risky. If you have a puddle that didn’t dry as well, it could stick. Any woodworker doing one piece of laminate will probably do another. Probably better to make some wood sticks...
Shops I know run one speed. As fast as it will go..
...
Pretty easy. A you do or B you don't… there’s no C and no D for none of the above..
And your finally answer is? :D
Then came the rain. Did get my new Flexilla
It’s going to be okay.
Calling Dr. Phil, Dr. Phil….
Glad I’m retired. Had employees with the same attitude, why? Why? Why?:rolleyes:
If you choose not to roll it , it’s your business. Don’t try to sell me on it. I’ve been putting this crap on since the 80’s with 5 gallons of Weldwood glue and a 7” paint roller.
I feel better...
I’m sorry, but shops use J rollers and I have a couple myself. We have all done 100’s of pieces of laminate at a time. That’s why we hire employees..
Some shops have pressure rollers..
Is what it is..1/8x 6=3/4 bend all at once..
I would use a J roller. We don’t all have that magic touch..
You’ll probably have go to 3/16. Depending on width you may need 1/8..
Air or kiln dried makes a difference
Coming from different places..
So are you using smaller strips or trying to bend solid?
Doweling isn’t as complicate$ as some of you make it out to be. It either fits or it doesn’t, it ain’t rocket science..
Microwave a dowel. I bought 10,000 dowels in the 80’s and I’ve used them...
I’m a heavy user on table saw. I have to have a 4’x64” on my saw. It doesn’t matter to me if it’s PB, laminate, MDO or MDF. Use a door or cover with Masonite, doesn’t matter as long as you keep it...
My table is 48” deep. This allows just over half of an 8’ material to rest before I grab it.
I started with an 8’ extension, but that was too long for my shop and I reduced it..
I w hold go to google images or Pinterest and look at tye 100’s of options…
I’ve had laminate, melamine and 1/4 masonite..
Yesterday was awful. Winds were bad here in KC. I’m trying to do this section before and big rains.Was talking to my neighbor down the street.He said he had them put ice shield on his house, but the...
Anybody can be an expert, Even a hobby woodworker. It’s not how well your educated or speak, but the projects you have built..