Sears (Craftmans) sold a 3-knife moulding head that included cutters for fluting. I have one, and with good hold downs, a zero clearence throat plate on a table saw, you can make flutes all day...
Type: Posts; User: Don Wurscher; Keyword(s):
Sears (Craftmans) sold a 3-knife moulding head that included cutters for fluting. I have one, and with good hold downs, a zero clearence throat plate on a table saw, you can make flutes all day...
Check out this at Rockler.com.
http://www.rockler.com/do-it-yourself-coffins-book
Couple of things that need to be checked prior to doing anything. 1. is the barrel free-flowing, if it is, you should be able to run a dollar bill from the breech to the tip of the stock. 2. If it...
Put a Shop Fox on mine from Grizzly, wish I had done it way sooner. Required some drilling
Only problem has been a need for an Aux fence, when cutting extremely thin material, as it wants
to slide...
Been running my 113.29943 for over 43 years (1972), without a problem, a couple of things though.
#1 Replace the fence (A must), I got my replacement from Grizzly, #2 the arbor on some Craftsmam...
Had mine since 03 no problems, and I use it alot. If you have a good vac hooked to it , I recommemd using ear protection, as the whistling noise when the spindle reaches the top, can get on your...
If you are going to route some dado's, Whiteside makes a great set of bits, for what is called undersize ply.
If you are going to use a 3/4" round over, you can use the pilot bearing for the first pass, but you will need a fence on your router table for the second. I use a fence for both passes saves time,...
I have a Craftsman Table saw that I have been using for almost 40 years, and belts are a major problems with my saw causing vibrations, as suggested a link belt is the way to go. Another thing with...
One thing I forgot to mention, is that using the pilaster kit allows you to adjust/readjust the shelves as needed.
Darin, just got through doing this very thing for my daughter, it is no picnic with those European hinges.
Blum makes a E-Hing that will alow the door to swing out of the way, but you still have to...
For you WorkSharp fans like me, check out page 6 of the latest Woodsmith
for a simple jig for sharping plane irons
I just acquired a near perfect PC-7399 Motor Unit (aka PC's RotorZip) nothing else. I would appreciate it if anyone who has a PC Laminate Trimmer with a PC-7309 base unit would measure the distance...
If you really want a howl, connect a sump pump drain hose to a vacuum, by twisting you can change the sound. Even play a tune if that is your
forte (ha-ha)
If you want an e-mail program with a little pazazz (sp) take a look at
Incredimail, the basic is free and has all kinds of what they call emoticons.
If your Grandson is like most, I would seriously consider pining the mortises.
The pins would greatly add to the strength of the joints, as well as add some
style if contrasting with the rest of...
Brought a couple 110/220V from Grizzly, the only problem I had was clearance at the back of a regular electrical box. Had to go to a deeper one to get clearance for 220V TS hookup .
Switch's work...
Count Me In
Count Me In
Count Me In
AVG and Zone here
I have a Shop Fox, as was previously stated, the proof is in the chisels, buy the best you can afford. Like all benchtop models the fence is its greatest weakness, but I have modified mine so that...
Count Me In
I use a face shield (mesh) similar to the ones used by timber cutters.
Count me in