Search:

I've really enjoyed your shop build, Mark. Inspiring. My CU300 is shoehorned into a single-car space in a three-car garage and I am tripping over DC hose. What part of town are you in?

The water finally receded from my street yesterday. It had been about four feet deep. Twelve of sixteen houses were flooded. Mine was spared by three inches. Further back in the neighborhood is...

When the humidity is too high, sweat will not evaporate and the body will not cool. In that case, wind speed means nothing.

This morning it was 77 degrees and 97% humidity. I was soaked in sweat...

Ever been to Houston? Irregardless of location, AZ and TX are both hot. You (assuming Phoenix) are at 105, feels like 104 with 19% humidity. We are at 96, feels like 108 with 54% humidity. It was...

Got you beat.

For reference, On my CU300 I used a bushing from a set I got at Harbor Freight.

We had an interesting thread a while back:
http://www.sawmillcreek.org/showthread.php?218859-Shaving-Schick-Krona

Happy Birthday from Katy, Tx!

Your best bet is to start here: https://www.antennaweb.org/. You can buy a lot of antenna for $50, or get one for free from someone who doesn't need theirs.

You may believe that your home made...

Keep in mind that you might hace 50% signal loss through your roof. Your antenna, compatible as it may or may not be to a flat mat type, may not be enough. I have a second hand 100 mile range...

+100! Very nice.

Using powertochoose.org can keep you in the $0.06-$0.08/kWh range if you know and manage your usage. That makes solar a hard sell.

Also, I wonder about servicing the roof. Roofs don't last long...

Toothpicks or part of a golf tee.

If your edge banding has a tight grain then I think Adam's idea is the closest to what you desire. Cut the veneers, stack and glue, and bend to match the curve. Cut your final veneer from the EDGE...

Very nice Heywood-Wakefield vibe!

You'll be hard pressed to go wrong with something from here:

http://flyingdragonairrifles.org/index.php?route=common/home

Rock solid mechanism and wood stocks.

I thought it would be appropriate to provide an update to my original question. In the end, I purchased a 3/8" x 50' Contractors Choice polyurethane hose from A-1 Coupling. The hose has a slight...

Slapping/slamming a palm and dragging a finger are hardly controlled tests. In addition the Bosch result images are close-up vs the SawStop images making it difficult to compare visually. From the...

A standard efficiency motor started across the line at full voltage will draw 6-7x the nameplate current for a very short period of time. The starting current draw when using a VFD is entirely...

Tom,
You are confusing the terminology. VFDs are often derated when a three-phase VFD is fed from a single-phase source. A three-phase VFD has six rectifier diodes on the input. When used with a...

I always like your work, Prashun. I am a big fan of the proportions, simple lines, and natural feel.

I have been using Kaspersky for several years. It seems to be light on resources.

Got it, Michael.

Wow, guys. Rubber hose was the only thing on my radar, but the weight and flexibility of the other styles have me reconsidering my position. Which means that it will take longer...

Do you have any specific recommendations that won't break the bank?

Sounds like a basic pick-and-place operation. With limited information, I would look at a venturi vacuum system rather than a fan. A fan is probably not the best method to hold something. You want...